Table of Contents
Advertisement
Clean the cabinet periodically using a damp, not wet, cloth. If heavily soiled, use a mild detergent.
Never use strong detergents or solvents such as alcohol or thinner.
Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
Light module
A light module containing multiple laser diodes is included in the product as the light source.
These laser diodes are sealed in the light module. No maintenance or service is required for the
performance of the light module.
End user is not allowed to replace the light module.
Contact a qualified distributor for light module replacement and further information.
Networking configuration
Do not make changes to the networking configuration unless you understand what you are doing,
or have taken advice from your Network Manager. If you make a mistake, it is possible that you will
lose contact with the projector. Always double-check your settings before applyinjg any changes to
your networking configuration. Always keep a written note of the original settings, and any changes
you have made.
Software update should NOT be carried out except by, or with the supervision of, NEC Service
personnel.
Important Information
Page 15
Advertisement
Table of Contents
