Section 3 − Installation; Specifications; Connecting Head/Coil To Power Source - Miller Electric Intellifire 250 Owner's Manual

3-1. Specifications

Output
Rated Output
Frequency Frequency
25 kW At
100% Duty
10 To 50 kHz Cycle − Max
750 A (RMS),
700 V (RMS)
*While idling
WARNING
HIGH-FREQUENCY RADIATION can interfere with radio navigation, safety services,
computers, and communications equipment.
Have only qualified person familiar with electronic equipment perform this installation.
The user is responsible for having a qualified electrician promptly correct any interference problem resulting from the installation.
If notified by the FCC about interference, stop using the equipment at once.
Have the installation regularly checked and maintained.
Keep high-frequency source doors and panels tightly shut.

3-2. Connecting Head/Coil to Power Source

Tools Needed:
7/16 in
SECTION 3 − INSTALLATION
Amperes Input at
Required
Rated Load Output 50
Reflective
or 60 Hz, Three-Phase
Inductance Inductance
460 V
39
2.5 To 50 h
0.29*
2
Overall Dimensions
KVA KW
Length: 31 in
(787 mm)
Width: 16 in
30.8 27.19
(406 mm)
Height: 27 in
(686 mm)
1
1
2
.
Weight
165 lb
(75 kg)
Rear Panel
Connecting Block
Do Not Exceed 58 in lb
.
(6.6 N m) of torque when
making connections.
Ref. ST-801 826-C
OM-184 227 Page 7