Usb Tethering And Mobile Hotspot; Usb Tethering; Mobile Hotspot - Kyocera DuraForce XD User Manual

USB Tethering and

Mobile Hotspot

USB Tethering

Turn USB Tethering On
1. Connect a computer to your phone
using the supplied USB cable.
2. From the Home screen, tap Apps
Settings > More > Tethering & Mobile
Hotspot.
Tip: You can also access this feature by
tapping Apps
from the Home screen.
3. Tap the ON/OFF switch to turn USB
tethering on, if it is not enabled.
4. Follow the onscreen instructions.
Mobile Hotspot
Turn Mobile Hotspot On
1. From the Home screen, tap Apps
Settings > More > Tethering & Mobile
Hotspot.
2. Tap the ON/OFF switch to turn Mobile
Hotspot on, if it is not enabled.
 If your phone's mobile data access is
not enabled, you will be prompted to
turn it on. Follow the onscreen
instructions.
Web and Data
> Mobile Hotspot
 The first time you turn it on, you will
be prompted to set up Mobile
Hotspot.
3. Follow the onscreen instructions.
Mobile Hotspot Settings
To set up Mobile Hotspot:
1. From the Home screen, tap Apps
Settings > More > Tethering & Mobile
>
Hotspot > Mobile Hotspot settings >
Configure Mobile Hotspot.
2. Confirm and change your Wi-Fi network
SSID (Service Set Identifier) if
necessary.
3. Tap in the Security field and select
the security level for your Mobile
Hotspot.
4. Enter your password if you selected a
security level that uses a password.
5. Tap SAVE.
Note: The best way to keep using the
phone as a hotspot is to have it
>
connected to a power supply.
Important: Write down the passkey
(password) for this communication
(shown onscreen).
To set the timer for turning Mobile Hotspot
off:
1. From the Home screen, tap Apps
Settings > More > Tethering & Mobile
Hotspot > Mobile Hotspot settings >
Mobile Hotspot turn off timer.
2. Select a timer option.
>
>
57