Trim And Door Installation - Vermont Castings SB38 Nstallation, Operation And Maintenance Manual

trim and door iNStallatioN

installation of Noncombustible trim materials to the front face of the fireplace
Figure 34
Combustible Framing Members
Facing Material to Top of
Spacers
M101
cautioN: Do not allow any trim materials to extend closer than 3/8 inch to the vertical edges of the
firebox opening if glass doors are to be installed.
mantel installation
Combustible Framing
Members to Top of Spacers
M100
Figure 35
combustible Sur-
round placement
Combustible surround
materials may be placed
inside the shaded areas.
Combustibles may not
overlap edge of black
painted face more than
1/8"
glaSS door iNStallatioN
This fireplace has been tested and listed for use with optional Models
GDB48 and GD48B (SB38 Series) and GDB54, GD54B and GD54SS
(SB44 Series) glass doors. For installation of the glass doors, refer to
the instructions provided with the doors.
87D0057
Noncombustible Facing
Material
Fireplace Face
cautioN: Do not cover or
restrict vent areas with any trim
materials.
12"
Max.
Top Edge of Fireplace
18" Min. From Fireplace Opening to
Bottom of Combustible Mantel
(Manufacturer Recommendation)
Top Edge of Fireplace
Opening
M1002
Mantel install
8/08
Outline of
Fireplace
Firebrick
Do Not Restrict
Side Air Inlets
FP2243
combustible surround
SB38 / SB44 Series Woodburning Fireplace
Use Only Noncombustible Materials
Below Top of Spacers
Steel Lintel
(Optional)
Combustible Mantel
warNiNg: The space between the face
of the fireplace and the noncombustible
facing material must be sealed. Failure
to properly seal this crack can cause
a possible fire hazard and will void the
Vermont Castings Group warranty.
Extend line from opposite
rear corner of firebox past
inside opening of the front
face side panel.
FP43
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
31