Rear Panel - Motorola DCX3200 User Manual

Section 1 -
Your new terminal
DCX3200 rear panel
4. AUDIO OUT L/R 6. COAXIAL S/PDIF
10. POWER CONNECTOR
5. VIDEO
9. HDMI
1. CABLE IN 2. IEEE 8. S-VIDEO 3. Y, Pb, Pr 7. OPTICAL S/PDIF
1. CABLE IN
Connects to the signal from the service provider.
2. IEEE
Dolby 5.1 digital audio/video interfaces. To connect an HD screen or television set.
3. Y, Pb, Pr
These connectors transmit component video to high definition receiver or television set. Use component cables.
4. AUDIO OUT L/R
Audio composite-type connectors transmitting analog sound to an audio receiver such as an amplifier or television set.
5. VIDEO
Video composite connector allows the transmission of images in analog mode to equipment such as VCR or television set.
Please note that the image is of lower quality compared to using the Component (Y, Pb, Pr) or HDMI output.
6. COAXIAL S/PDIF
COAX S/PDIF connector is an optical digital output transmitting Dolby Digital 5.1 or audio PCM sound used to connect the
cable box to a stereo tuner or an A/V receiver to get theater-quality surround sound through a S/PDIF fibre optic-type cable.
7. OPTICAL S/PDIF
OPTICAL S/PDIF connector is an optical digital output transmitting Dolby Digital 5.1 or audio PCM sound used to connect the
cable box to a stereo tuner or an A/V receiver to get a theater-quality surround sound through a S/PDIF fibre optic-type cable.
8. S-VIDEO
Connector transmitting high quality standard video to S-VIDEO peripherals such as high-end VCR and television set. Use an
S-VIDEO-type cable along with an audio composite cable.
6
DCX user guide