Motorola DCX3200 User Manual page 13

Section 1 -
Your new terminal
1. CABLE IN
Connects to the signal from the service provider.
2. OPTICAL S/PDIF
OPTICAL S/PDIF connector is an optical digital output transmitting Dolby Digital 5.1 or audio PCM sound used to connect the
cable box to a stereo tuner or an A/V receiver to get a theater-quality surround sound through a S/PDIF fibre optic-type cable.
3. Y, Pb, Pr
These connectors transmit component video to high definition receiver or television set. Use component cables.
4. AUDIO L/R
Allows adjustment of the volume sent to a stereo receiver.
5. VIDEO
Video composite connector allows the transmission of images in analog mode to equipment such as VCR or television set.
Please note that the image is of lower quality compared to using the Component (Y, Pb, Pr) or HDMI output.
6. HDMI
Dolby 5.1 digital audio/video interfaces. To connect an HD screen or TV set, use a HDMI/HDMI or HDMI/DVI cable, depending
on the television set.
7. eSATA
Not yet operational.
8. IEEE
Not yet operational.
9. POWER CONNECTOR
To plug in the female end of the supplied power cord.
12
DCX user guide