Rear Panel - Motorola DCX3200 User Manual

Section 1 -
DCX3400 rear panel
4. Y, Pb, Pr
1. CABLE IN
2. IEEE
3. RF OUT
1. CABLE IN
Connects to the signal from the service provider.
2. IEEE
Dolby 5.1 digital audio/video interfaces. To connect an HD screen or television set.
3. RF OUT
Conventional cable output used to transmit basic image and sound. Connect with standard cable.
4. Y, Pb, Pr
These connectors transmit component video to high definition receiver or television set. Use component cables.
5. AUDIO OUT L/R
RCA-type connectors transmit sound to a stereo receiver.
6. VIDEO
Video composite connector allows the transmission of images in analog mode to equipment such as VCR and television set.
Please note that the image is of lower quality compared to using the Component (Y, Pb, Pr) or HDMI output.
7. COAXIAL S/PDIF
Coax S/PDIF orange connector is a digital output supporting Dolby Digital 5.1 or audio PCM sound used to connect the terminal
to a stereo tuner or an A/V receiver to get a theater-quality surround sound.
8. OPTICAL S/PDIF
OPTICAL S/PDIF connector is an optical digital output transmitting Dolby Digital 5.1 or audio PCM sound used to connect the
cable box to a stereo tuner or an A/V receiver to get a theater-quality surround sound through a S/PDIF fibre optic-type cable.
DCX user guide
Your new terminal
5. AUDIO OUT L/R
6. VIDEO
7. COAXIAL S/PDIF 10. FAN
11. HDMI
8. OPTICAL S/PDIF
9. S-VIDEO 12. eSATA
13. POWER OUTPUT
14. POWER CONNECTOR
9