Section 3 − Introduction; Specifications; Section 4 − Installation; Installing Swivel Into Pipe Post - Miller Electric and DS-74DX16 Owner's Manual

3-1. Specifications

Type of Input Welding Power
Power Source Type
24 Volts AC
Constant Voltage (CV)
Single-Phase
DC With 14-Pin And
10 Amperes
Contactor Control
50/60 Hertz
Maximum Height With 4 ft (1.2 m) Post
Vertical Lift Of Boom

4-1. Installing Swivel Into Pipe Post

Tools Needed:
3/4 in
SECTION 3 − INTRODUCTION
Wire Feed Speed
Range
Standard: 50 To 780 ipm
(1.3 To 19.8 mpm)
Optional High Speed: 92
To 1435 ipm
(2.3 To 36.5 mpm)
12 ft (3.7 m) Boom (DS-12)
17 ft (5.2 m)
Horizontal to 60 Above Horizontal
SECTION 4 − INSTALLATION
2
1
Wire Diameter Welding Circuit
Range
.023 To 1/8 in (0.6
100 Volts,
To 3.2 mm)
750 Amperes, 100%
Duty Cycle
Max Spool Weight:
60 lb (27 kg)
16 ft (4.9 m) Boom (DS-16)
Horizontal to 60 Above Horizontal
!
5
1
4
2
3
Secure as shown using as a mini-
mum 1/2 in diameter SAE grade 5
steel bolts.
4
Insert into pipe post. Lubricate
3
swivel.
5
Weight
Rating
12 ft (3.7 m):
207 lb (94 kg)
16 ft (4.9 m):
280 lb (127 kg)
21 ft (6.4 m)
Do not remove Safety Collar
until instructed to.
Swingpak Base or CBC Cart
Pipe Post With Base
Steel Bolt
Swivel Assembly
Safety Collar
152 268-B
OM-1500-14 Page 11