Connecting Gas/Air Supply; Connecting Work Clamp - Miller Electric 375 X-TREME User Manual

4-6. Connecting Gas/Air Supply

Tools Needed:
9/16 in

4-7. Connecting Work Clamp

2
.
A complete Parts List is available at www.MillerWelds.com
1
1
.
1
2
3
Obtain hose with 1/4 NPT right-
hand thread fitting. Wrap threads
with teflon tape (optional) or apply
pipe sealant, and install fitting in
opening. Route hose to gas/air
supply.
2
3
From Gas/Air
Supply
1
2
Connect work clamp to a clean,
paint-free location on workpiece, as
close to cutting area as possible.
Use only clean, dry air with 90
to 120 psi (621 to 827 kPa)
pressure.
Gas/Air Inlet Opening
Hose
Teflon Tape
804 505-A
Work Clamp
Workpiece
802 463-A
OM-225 216 Page 11