Creating A Raid Driver Disk - Asus P4P800 SE User Manual

5.7

Creating a RAID driver disk

A floppy disk with the Intel
Windows ® XP/2000 operating system. You can create a RAID driver disk
using the Makedisk.exe utility in the support CD.
To create a RAID driver disk:
1. Insert the motherboard support CD into the CD-ROM drive and locate
the Makedisk.exe utility for your RAID controller.
The Makedisk.exe utility for the Intel
"\Drivers\Chipset\IAA\Makedisk.exe" of the motherboard support
CD.
The Makedisk.exe utility for Intel
2000 only.
2. Insert a clean floppy disk into the floppy disk drive and execute
Makedisk.exe. Follow succeeding screen instructions to complete the
process.
3. Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6 key
to install third-party SCSI or RAID driver.
2. Press <F6> then insert the RAID disk driver into the floppy disk drive.
3. Follow the succeeding screen instructions to complete the installation.
ASUS P4P800 SE motherboard
® RAID driver is required when installing
® RAID driver is located in
® RAID is supported in Windows ® XP/
5-21