Table of Contents
Advertisement
2. Press <Del> to delete the RAID volume.
3. The utility prompts a verification message, press <Y>.
5.6.6 Reset RAID Data
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
0 ST380013AS
1 ST380013AS
Take caution when using this option. All data on the RAID drives and
all internal RAID structures will be lost!
To reset RAID data and remove any RAID structures in the drives:
1. Select 3 Reset RAID Data and press <Enter>.
Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.
WARNING: Selecting "Yes" will cause all data on any RAID disk
2. The utility prompts a confirmation message, press <Y>.
5-20
[
VOLUME DELETE VERIFICATION
Are you sure you want to delete this volume?
ALL DATA IN THE VOLUME WILL BE LOST!!
Are you sure you want to delete volume "RAID_Volume1"? (Y/N)
1.
Create RAID Volume
2.
Delete RAID Volume
3.
Reset Disks to Non-RaID
4.
Exit
[
DISK/VOLUME INFORMATION
Serial #
xxxxxxxx
xxxxxxxx
[
[
]-Select
]-Select
[ESC] Exit
[ESC] Exit
[
RESET ALL DATA RAID DATA
(RAID Volume or Other RAID Disk) to be lost.
Are you sure you want to destroy all RAID data (Y/N):
]
[
MAIN MENU
]
]
Size
Status
74.5GB
Normal
74.5GB
Normal
[Enter]-Select Menu
[Enter]-Select Menu
]
Chapter 5: Software support
Bootable
Yes
Yes
Hide quick links:
Advertisement
Table of Contents
