Table of Contents
Advertisement
Exiting the Intel
To exit the utility:
1.
From the utility main menu, select 5. Exit, and then press <Enter>. The following
warning message appears:
2.
Press <Y> to exit or press <N> to return to the utility main menu.
4.2
Creating a RAID driver disk
4.2.1
Creating a RAID driver disk in Windows
To install the RAID driver for Windows
1.
During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
2.
Insert the support USB drive with RAID driver into the USB port, and then click
Browse.
3.
Click the name of the device you've inserted, go to Drivers > RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
4.
Follow the succeeding screen instructions to complete the installation.
To set up a Windows
driver for your optical drive.
4-10
Rapid Storage Technology Option ROM utility
®
[CONFIRM EXIT]
Are you sure you want to exit? (Y/N):
®
UEFI operating system under RAID mode, ensure to load the UEFI
®
OS:
®
Chapter 5: RAID Support
Advertisement
Table of Contents
