Section 4 − Installation; Specifications; Removing Top Cover - Miller Electric Spoolmatic 15A Owner's Manual

4-1. Specifications

Approximate
Wire Diameter
Wire Feed
Range
Range
.025 Thru 1/16 in
(0.6 Thru 1.6 mm)
Aluminum Wire 70 To 875 ipm
(1.7 To 22.2
.025 Thru .045 in mpm)
(0.6 Thru 1.1 mm)
Hard Or Cored Wire
NOTE

4-2. Removing Top Cover

OM-1213 Page 10
SECTION 4 − INSTALLATION
Cooling Maximum
Method Spool Size
4 in (102 mm)
Air Cooled
Diameter
Use weld control or welding power source Owner's Manual during gun installation.
If contact tip, liner, and drive roll groove are not correct for wire size and type, see
Section 6 to change parts as needed. See Parts List for other available contact
tips.
1
Weld
Circuit IP Rating
Rating
100 Volts, Length: 15-3/8 in
200 Amperes,
100% Duty
IP 23
Cycle Using
Argon
Shielding Gas
Overall
Weight
Dimensions
2.9 lb
(1.3 kg) Gun
Only
(390 mm)
Width: 2-1/2 in 15A Model:
(64 mm) 9 lb (4.1 kg)
Height: 10-3/4 in Gun With Cable
(273 mm) 30A Model:
14 lb (6.4 kg)
Gun With Cable
1 Top Cover Triangular Boss
Push up on triangular boss to open
door. Door hinges on handle.
To open door fully, push up on door
until it clicks into position.
.
If door is pushed too far it will
separate from handle. If this
happens the door can be rein-
stalled.
Push door back into original posi-
tion to close.
150 882-G