Dometic EA 3080 Service Manual page 28

- By applying firm pressure to the clamp, snap the heating element onto the
boiler. (Figure 105)
Figure 105
- Position element, adjust its position. The element must be positioned in the
direction of hinge, and its upper edge must be ~ 85 mm from the lower
edge of the plate holding the aggregate (see: spare parts exploded
view).
- Reinsert boiler-insulation (see 2.3.3)
- Reinsert boiler-insulation cover, bend back blocking tabs. (Figure 106)
- Reinsert temperature controller (see 2.3.4).
- Snap back wire clamp of heater element. (Figure 107)
Figure 106
- Reassemble loosened end of hinge (see 2.2.3).
- Check electrical insulation resistance according to 2.3.3.
Figure 107
28