Dometic EA 3080 Service Manual page 23

- Foam insert I. – remove securing strap of foam insert II.
- Pull off foam inserts in opposite directions from evaporator tube. (Figure
90,91)
Figure 87
- Push pair of foam inserts onto the new aggregate, secure with insulation
tape.
Final assembly of temperature controller, mounting onto aggregate:
Figure 89 presents the necessary elements and tools, for your information.
- Cut the wire of the temperature controller to size, according to the temperature
controller on the replaced aggregate. (Figure 90)
- From the connection kit, choose the connection elements that are identical to the
original temperature controllers.
- Press connection elements with press tool. (Figure 91)
- Pull insulation sockets onto connectors. (Figure 92)
Figure 88
Figure 89
23