Special Modes Setting - Panasonic DMR-ES10EB Service Manual

DMR-ES10EB / DMR-ES1 0EC / DMR-ES1 0EG / DMR-ES1 0EP / DMR-ES10EBL
Error Code Diagnosis contents
PLEASE Unit is in termination process
WAIT
9.2.

Special Modes Setting

Mode name
TEST Mode
Rating password
Service Mode
Forced disc eject
Child lock/unlock
NTSC/PAL system select To switch PAL/NTSC alternately.
Forced power- off
Aging
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
Item
Description
*All the main unit´s parameters (include tuner)
are initialized.
The audiovisual level setting password is
initialized to "Level 8".
Setting every kind of modes for servicing.
*Details are described in "9.3. Service
Mode".
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Set or release "Child Lock".
When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute "Forced Power- off" after releasing
Timer REC or EXT-LINK.
Perform sequence of modes as * Aging
Description shown below continually.
Description
No display
FL display
The display before
leaves.
The display before
leaves.
Display in P-off mode.
Display following the then mode.
16
Monitor Display Automatic FL display
Key operation
Front Key
Press [STOP],
[OPEN/CLOSE]
simultaneously
when power is off.
Open the tray, and press [REC] and
[PLAY] simultaneously
seconds.
NOTE:
Drive should be selected to DVD.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
execution When the power is off, press
[STOP] and
simultaneously for 5 seconds.
Press [ENTER] and [RETURN] by
remote controller
until [X-HOLD] is displayed.
execution While the power is on (E-E mode),
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.
Press [Power] key over than 10
seconds.
When the power is ON, press
[STOP],
[OPEN/CLOSE] simultaneously for
over 5 seconds and less than 10
seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit's parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-
execute this command.
*When releasing Aging mode, press
[POWER] key.
[CH UP] and
keys
for five seconds
for 5
[CH UP] keys
simultaneously
[POWER] and