Service Modes - Panasonic DMR-ES10EB Service Manual

DMR-ES10EB / DMR-ES1 0EC / DMR-ES1 0EG / DMR-ES1 0EP / DMR-ES10EBL
9.3.

Service Modes

Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneous ly for five seconds.
Mode name
Release Items
Error Code Display
ROM Version Display
White Picture Output
Magenta Picture Output
RTSC Return in XP
(A & V)
I/P Switch
Item
Description
Item of Service Mode executing is cancelled.
Last Error Code of U/H/F held by Timer is
displayed on FL.
*Details are described in
Diagnosis Functions".
Region code, MAIN firm version, TIMER firm
version and DRIVE firmware versions are
displayed on FL for five seconds per each
version in order, but ROM version will be left
displayed.
White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
AV1 input signal is encoded (XP), decoded
(XP) and output decoded signal to external
without DISC recording and DISC playback.
Switch Interlace and Progressive in EE mode.
*Initial setting is "Interlace".
*This command is effective during executing
"White Picture Output", "Magenta Picture
Output" and "RTSC Return in XP (A & V)"
modes.
FL display
"9.1. Self-
''*'' are version displays.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Switch Interlace/Progressive
Audio 44.1 kHz/ 48 kHz Switch
Initial mode is Interlace
Switch Interlace/Progressive
18
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Press [1] [3] in service mode.
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.