Cleaning the epilator and attachments
Clean the epilating head after each wet use to ensure optimum performance.
Always switch off the appliance before you clean it.
1
Switch off the appliance.
2
Remove the cap from the epilating head.
3
Press the release button (1) and remove the epilating head from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
4
Remove loose hairs with the cleaning brush.
5
Rinse all parts (epilator, epilating head and caps) under a lukewarm
tap while turning them.
6
Shake excess water off the parts and let them dry.
Note: For hygienic reasons, make sure all parts are dry before you reassemble
the appliance.
7
To reattach the epilating head, place it on the appliance and press it
onto the appliance until it snaps home.
Cleaning the shaving head and the comb
1
Remove the comb, if attached, by pulling it off the shaving head.
EnglisH
19