Control Panel; Active Charcoal Filter; Overhead Lighting - Miele DA211 Operating And Installation Instructions

a Chimney extension
b Chimney
c Canopy
d Control panel
e Active charcoal filter
f Recirculation vent
g Overhead lighting
h Grease filters
i Light button
j On/Off button
k Fan power level buttons
Four fan speed selection
l Delayed Shut Down
This button activates the Delayed Shut
Down feature. The fan can be set to
turn off automatically after either 5 or 15
minutes.
Guide to the appliance
m Grease filter button
The indicator above the grease filter
button lights when the grease filters
need to be cleaned. This button is also
used:
– to reset the grease filter timer after
cleaning the grease filters (see
"Cleaning and Care").
– to show how long the grease filters
have been in use (see "Operation /
Filter timers").
– to change the number of hours
counted by the grease filter timer
(see "Operation / Reprogramming the
filter timers").
n Charcoal filter button
(used in recirculation mode only)
The indicator above the charcoal filter
button lights when the charcoal filters
need to be replaced.
This button is also used:
– to reset the charcoal filter timer after
changing the filters (see "Cleaning
and care").
– to show how long the charcoal filters
have been in use (see "Operation /
Filter timers")
– to change the number of hours
counted by the charcoal filter timer
(see "Operation / Reprogramming the
timers").
9