Table of Contents
Related Manuals for Miele DA 2050
Summary of Contents for Miele DA 2050
- Page 1 Operating and Installation instructions Rangehood DA 2050 en - AU, NZ To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 723 310...
-
Page 2: Table Of Contents
Contents Caring for the environment ......... . 3 Warning and Safety instructions . -
Page 3: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material or machine The transport and protective packing Electrical and electronic appliances / has been selected from materials which machines often contain materials are environmentally friendly for disposal which, if handled or disposed of and can normally be recycled. -
Page 4: Warning And Safety Instructions
Please be aware that on rangehood the manufacturer and could be with halogen lighting, the lamps will get dangerous. Miele cannot be held liable very hot during use and remain hot for for damage resulting from incorrect or some time after switching off. To... -
Page 5: Technical Safety
Technical safety Installation, maintenance and repairs may only be carried out by a Before installation, check the Miele authorised person in accordance rangehood for visible signs of damage. with current national and local safety Under no circumstances should you regulations. - Page 6 Warning and Safety instructions Do not connect the appliance to the Using at the same time as other mains electricity supply by a heating appliances that depend on multi-socket unit or an extension lead. the air from the room These do not guarantee the required safety of the appliance (e.g.
-
Page 7: Correct Use
Warning and Safety instructions Correct use In order to ensure safe operation, and to prevent gases given off by the Never use an open flame beneath heating appliances from being drawn the rangehood. To avoid the danger of back into the room when the rangehood fire, do not flambé... -
Page 8: Correct Installation
All ducting, pipework and fittings into the appliance and hindering its must be of non-flammable material. smooth operation. These can be obtained from Miele or The filters should be regularly from builders' merchants. cleaned or changed as appropriate. The appliance must not be Saturated filters are a fire hazard. -
Page 9: Modes Of Operation
Modes of operation The rangehood works with . . . air recirculation: . . . air extraction: (requires a conversion kit and charcoal The air is drawn in, cleaned by the filters: see "Technical Data") grease filter and then directed outside. The air is drawn in and cleaned first by If the on-site ventilation system does the grease filter and then by two... -
Page 10: Guide To The Appliance
Guide to the appliance a Lighting switch b Fan switch c Cooktop lighting d Charcoal filters Special accessory for recirculation mode e Grease filter... -
Page 11: Operation
Operation To switch the lighting on and The cooktop lighting a can be switched on and off independently of the fan. "0" - lighting off "1" - lighting on To switch the fan on ^ Turn switch b for the fan to "1". To select a power level You can select one of three power levels with switch b depending on how... -
Page 12: Cleaning And Care
A range of Miele branded cleaning and conditioning agents are available to order through your Miele Chartered Agent from Miele or via the internet on www.miele-shop.com. Housing The surfaces and controls are susceptible to scratches and abrasions. - Page 13 Ensure the spray arm is not obstructed. ^ Do not wash at more than 65 °C. If a Miele dishwasher is being used, select the Sensor wash programme. ^ Use a mild dishwasher detergent. Depending on the cleaning agent...
-
Page 14: Fitting And Replacing The Charcoal Filters
New filters can be purchased from your Miele Chartered Agent or from Miele. See back cover for contact details, and "Technical data" for the model number of the filter. -
Page 15: Changing A Halogen Lamp
Cleaning and care Changing a halogen lamp Before any cleaning or maintenance work is carried out, disconnect the rangehood from the mains supply. Ensure that: – it is switched off at the isolator, or – it is switched off at the wall socket and the plug removed, –... -
Page 16: Appliance Dimensions
Appliance dimensions Safety distances between cooktop and rangehood (S) The minimum safety distances between the top of a cooktop and the bottom of the rangehood are as follows, unless a greater distance is specified by the manufacturer of your cooking appliance: Cooking appliance Distance... - Page 17 Appliance dimensions – When deciding on the safety distance between the cooktop and rangehood, please note that a distance of 650 mm above electric cooktops may be preferable to give more working space under the hood. – Account should also be taken of the height of the person who will be using the hood most often.
-
Page 18: Installation
Installation Fitting the non-return flap (Air extraction mode only) ^ Place the appliance in the cut-out from below and align it. ^ Secure the rangehood by the frame ^ If a non-return flap is not present in using 3.5 x 16 mm screws. the venting system, the non-return flap supplied must be fitted onto the exhaust socket in the motor unit. -
Page 19: Preparation For Extraction
^ See "Connection for air extraction" for For this, conversion kit DUU 151 further instructions on fitting the (available from Miele Chartered Agent ducting. or Miele) is required. You will also need two charcoal filters (see “Technical data”). -
Page 20: Electrical Connection
Installation ^ Dismantle the non-return flap. ^ Take the on-site conditions into account when fitting the conversion kit. When fitting the exhaust grille, make sure that the slats in the grille point towards the centre of the room and not directly towards a wall or the ceiling. -
Page 21: Connection For Air Extraction
Connection for air extraction – The exhaust ducting should not be Important: To avoid the danger of kinked or compressed. toxic fumes, please observe the – Ensure that all connections are Warning and Safety instructions. strong and airtight. This is especially crucial when using –... -
Page 22: Condensate Trap
Connection for air extraction Condensate trap (optional accessory) For installations in areas where the exhaust ducting is exposed to cold temperatures, we recommend insulating the exhaust ducting and installing a condensate trap to collect and evaporate any condensate which may occur. Condensate traps are available for C 125 mm or C 150 mm ducting. -
Page 23: Silencer
Connection for air extraction Silencer (DASD 150, optional accessory) ...with air extraction: The silencer not only reduces noise from the fan, but also sounds from outside (e.g. traffic noise). To achieve even further reductions in For this reason, the silencer must be noise levels, a special silencer can be positioned as close as possible to where fitted in the ducting system. -
Page 24: Electrical Connection
Electrical connection If the switch is not accessible after All electrical work should be installation, an additional means of undertaken by a suitably qualified disconnection must be provided for all and competent person in strict poles. accordance with current national For extra safety, it is advisable to install and local safety regulations. -
Page 25: After Sales Service
In the event of a fault which you cannot correct yourself, please contact: – Miele You will find the telephone number and address of Miele on the back cover of the manual. Please quote the model and serial number when contacting Miele. These... -
Page 26: Technical Data
Level II....230 m Level IV Intensive Setting ..360 m Special accessories for recirculation mode: – Conversion kit DUU 151 – Miele charcoal filter pack DKF 15-1 (each pack contains 2 filters) - Page 28 Alteration rights reserved / 3013 M.-Nr. 09 723 310 / 00...