Table of Contents
Advertisement
2.8
Removing components
You may need to remove previously installed system components when installing
or removing other system components, or when replacing a defective component.
This section tells how to remove the following components:
1.
Floppy disk drive (FDD)
2.
System fan
3.
SATA backplane
2.8.1
Removing the floppy disk drive
To remove the FDD
1.
Disconnect the FDD power plug
and signal cable.
3.
Carefully pull the FDD bay from the
chassis.
4.
Remove the four screws from the
FDD bay to release the FDD.
2-22
Chapter 2: Hardware setup
Advertisement
Table of Contents
