Table of Contents
Advertisement
5.3.3
Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
1.
From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
to uniquely identify the RAID volume. This name is case sensitive and cannot
[ ↑↓ ]-Select
2.
Enter a name for the RAID 10 set, then press <Enter>.
3.
Highlight RAID Level, press the up/down arrow key to select
RAID 10 (RAID0+1), then press <Enter>.
4.
Follow steps 4 to 9 of section 5.3.1 Creating a RAID 0 set (striped) to create
the RAID 10 set.
5-14
Intel(R) Matrix Storage Manager Option ROM v7.6.0.1011 ICH9R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[
DISK/VOLUME INFORMATION
Enter a string between 1 and 16 characters in length that can be used
contain special characters.
[ESC]-Exit
[
CREATE ARRAY MENU
]
Volume1
RAID10(RAID0+1)
Select Disks
128KB
0.0
GB
Create Volume
[ENTER]-Select Menu
]
Chapter 5: RAID configuration
Advertisement
Table of Contents
