Taking A Break ..Five Minutes Or More - Kärcher K 3.48 M Operator's Manual

STEP 3:

Turn on the pressure washer (I).
Pull trigger to operate unit. Liquid
detergent is drawn into the unit and
mixed with water. Apply detergent
to work area. Do not allow deter-
gent to dry on surface.
STEP 4:

To rinse, move the VPS out of „Mix"
position and pull trigger to operate
unit.
STEP 5:

Cleaning up: Always draw fresh
water through the detergent tank or
siphon tube when done to flush any
remaining detergents from the in-
jection system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.

TAKING A BREAK ..five minutes or more

STEP 1:

Release trigger and engage gun
safety lock.
Always Use Kärcher
Best Results
Kärcher biodegradable detergents
®
are specially formulated to protect the
environment and your pressure wash-
er. The special formula won't clog the
suction tube filter and will protect the
internal parts of the pressure washer
for a longer life. For Kärcher
gents, check your retailer or visit our
website:
www.buykarcher.com
CAUTION
Never use:
Bleach, Chlorine products and oth-
–
er corrosive chemicals
Liquids containing solvents (i.e.,
–
paint thinners, gasoline, oils)
Tri-sodium phosphate products
–
Ammonia products
–
Acid-based products
–
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
STEP 2:

Turn pressure washer to OFF (0)
position.
Detergent for
®
Deter-
®
11
English