Hardware Monitor - Asus Terminator 2 Barebone System T2-P User Manual

Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]

5.5.6 Hardware Monitor

Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan Speed
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
SMART Q-Fan Function
Fan Auto Start Voltage
Fan Auto Mode Start Temp
Fan Auto Mode Full Speed Temp [70°C]
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select [Disabled] if you do not wish to
display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU,
chassis, and power fan speeds in rotations per minute (RPM). If any of the
fans is not connected to the motherboard, the specific field shows N/A.
ASUS Terminator 2 barebone system
[44°C/111°F]
[36°C/96.5°F]
[5234RPM]
[N/A]
[1.808V]
[3.376V]
[5.080V]
[11.977V]
[Enabled]
[5.0V]
[30°C]
CPU temperature.
117