Presetting A Station; Adjusting The Volume - Asus Terminator 2 Barebone System T2-P User Manual

3.5.3 Presetting a station

To preset a radio station:
1. Put the Audio DJ in radio mode.
2. Select the radio station you wish to preset by pressing the
PLAY/PAUSE ( / ) button for less than 2 seconds.
3. After selecting the radio station, press the PLAY/PAUSE ( / ) button
for more than 2 seconds or until the station frequency display in the
LED panel blinks.
4. Use the NEXT ( ) button or the PREVIOUS ( ) button to select a
preset number (1 ~ 9) for the selected station.
5. Press the PLAY/PAUSE ( / ) button to assign the preset number to
the radio station.

3.5.4 Adjusting the volume

+ ) button to increase the volume or the (
Press the (
decrease the volume.
Connect a headphone or PC speakers to the rear or front panel Line
Out port for audio output.
60
– ) button to
Chapter 3: Starting up