Discard Changes; Load Setup Defaults - Asus Terminator 2 Barebone System T2-P User Manual

If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Pressing <Enter> saves the changes while
exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made
to the Setup program. If you made changes to fields other than system date,
system time, and password, the BIOS asks for a confirmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the
previously saved values. After selecting this option, a confirmation appears.
Select [Yes] to discard any changes and load the previously saved values.

Load Setup Defaults

This option allows you to load the default values for each of the parameters
on the Setup menus. When you select this option or if you press <F5>, a
confirmation window appears. Select [Yes] to load default values. Select Exit
Saving Changes or make other changes before saving the values to the
non-volatile RAM.
126 Chapter 5: BIOS setup