Main Venting Duct - Miele PT 5136 OS Operating And Installation Instructions

Installation - extraction ducting
d Main venting duct
,
There must be one non-return
flap per dryer installed directly on
the main venting duct R. Extra Miele
equipment* is required for this
purpose. If this not observed, the
dryers could be damaged and their
electrical safety impaired!
When up to five dryers are being
installed, the pipe diameter D must be
increased.
Number of
Dryers for the pipe diameter
2
3
4-5
44
Magnification factor
from Table II
1
1.25
1.5
1 Connection to the main venting duct
2 Miele non-return flap*
3 Additional Miele adapter*
4 Miele vent hose, very flexible*
^ Push the non-return flap (2)
completely into the adapter (3).