Cleaning And Care; Cleaning The Fluff Filter - Miele PT 5136 OS Operating And Installation Instructions

Cleaning the fluff filter

The fluff which is created by the drying
process is collected in the fluff filter in
the door. Clean the filter after each
drying cycle*.
Cleaning the filter whilst dry
^ Open the door and pull the fluff filter
(1) out as illustrated.
^ Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.

Cleaning and care

^ Remove any fluff from the hollow part
of the door opening. You could also
use a cleaning brush which is
available as an optional extra from
your Miele dealer or the Miele Spare
Parts Department, or use a vacuum
cleaner.
^ Also clean the door seal (2) with a
damp cloth.
Cleaning the filter with water
If there is a great deal of compacted
fluff on the filter, it can be removed
and cleaned under hot running
water.
^ Rinse the filter under hot, running
water.
^ Dry the filter carefully and thoroughly.
Replacing the filter
^ Once clean and dry, push the filter
back into the door holder until it
clicks into position. Ensure it is facing
the correct way.
^ Close the door.
,
* The fluff filter should be
checked and cleaned regularly, but
always clean immediately if the
Clean out airways message
appears.
23