ReliOn Micro User Instruction Manual page 41

IMPORTANT
• Was the sample free of clear or watery fluid?
• Was the drop large enough (at least 0.3 µL)?
• Did the reaction site fill with enough blood all at once?
Step 5:
The meter will count down, showing a flashing dash, and
display result in 7 seconds.
CONSIDER YOUR RESULT. REPEAT ALTERNATE SITE
TEST:
• IF the blood sample appeared to be diluted with clear fluid.
• IF you did not vigorously rub the test site.
• IF the blood drop was not large enough to fill the
reaction site.
• IF the test was accidentally marked as a "Control" result.
• IF your result was not consistent with how you feel.
• I F more than 20 seconds elapsed from sample collection to
measurement (evaporation of the blood sample may cause
a test result that is higher than the actual value).
Any of the above situations can lead to an inaccurate test result.
IF NOT,
REPEAT TEST.
Filled
Filled
Not Filled
41
Not