Setting The Audible Beep - ReliOn Micro User Instruction Manual

Setting the Audible Beep

If the audible beep is turned "on", the beep will sound when:
• You insert a test strip into the meter.
• You apply blood or control solution to a test strip.
• The test has ended and the result is displayed.
• The meter is turned on, but you do not use it for several minutes.
Meter will beep and automatically shut off.
• You go into Memory Mode.
Make sure the meter is off. Press the and
buttons at the same time for 5 seconds.
A beep sounds and the meter turns on. Next, a
second beep sounds and "SET" shows on the
screen.
Press the button. The screen will
display "bEP" and the current beep setting.
16