Test Average Display - ReliOn Micro User Instruction Manual

Setting Test Average Display
NOTE:
"Lo" results are included as 20 mg/dL in the averages. "Hi"
results are included as 600 mg/dL in the averages. Test results with the
following symbol or flag are not part of the result average: temperature
error symbol, control solution flag, or delete flag.
Press the button to cycle through the test
averaging choices: "oFF" (not displayed),
"7" (7-day average), "14" (14-day average),
or"30" (30-day average).
If you select either 7-day, 14-day, or 30-day
averaging, your average test result will appear
when you recall results from memory. See
page 58.
After you set test averaging, press the
button to confirm the setting.
21