Pride Mobility LEGEND Owner's Manual page 12

Hide thumbs Also See for LEGEND:
Table of Contents

Advertisement

Speed Adjustment Dial
This dial allows you to preselect and limit your Scooter’s top speed.
n Set the speed between the slowest (image of the tortoise) and the fastest (image of the hare) speed settings.
Left and Right Turn Indicator Buttons
These buttons enable you to turn on the left and right turn indicator lights.
n Push the appropriate turn indicator button once to illuminate the signal light before turning your Scooter.
Your Scooter’s turn indicators are timed to shut off automatically.
Light Switch
This switch enables you to control your Scooter’s headlight and running (rear red) lights.
n Press this switch once to turn on the lights.
n Press it again to turn off the lights.
Horn Buttons
These buttons activate the warning horn.
n Ensure that the key is fully inserted and turned clockwise; then push either horn button to sound the horn.
Reverse and Forward Throttle Control Levers
These levers allow you to control the forward and the reverse speed up to the maximum speed you preset on the
speed adjustment dial. For instructions on how to operate your Scooter’s throttle control levers, see VI. “Opera-
tion.”
Hazard Light Switch
This switch enables you to control your Scooter’s amber hazard lights (4-way flashers).
n Toggle this switch to turn the hazard lights on and off.
Key Switch
This switch enables you to power up and power down your Scooter.
n Fully insert the key into the key switch and turn the key clockwise to power up your Scooter.
n Turn the key counterclockwise and pull the key out to power down your Scooter.
WARNING! If the key is removed from the key switch while your Scooter is in motion, the elec-
tronic brakes will engage and your Scooter will come to an abrupt stop.
Status LED
The Status LED alerts you to electrical problems that may occur with the Legend. The LED remains constantly lit while
your Scooter is on. If the Legend develops an electrical problem, the status LED will flash a code. See IX. “Troubleshoot-
ing” for flash codes.
Battery Condition Meter
When your Scooter’s key is fully inserted and turned clockwise to power up your Scooter, this meter indicates
approximate battery voltage strength. For further information on battery charging, see V. “Batteries and Charg-
ing.”
12
I V .
D E S C R I P T I O N
Legend

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Legend

Table of Contents