Creating A Raid Driver Disk - Asus Motherboard P5V-VM DH User Manual

3.4

Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing Windows
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
. Place the motherboard support CD into the CD-ROM drive.
2. When the Drivers menu appears, click Make VIA VT825 32/64bit
RAID Driver Disk to create a VIA RAID driver disk
Or
Browse the contents of the support CD to locate the driver disk utility
and go to \Drivers\Chipset\EIA 4 in 1\Disk for the VIA RAID
driver disk utility
Refer to section "3.2.2 Drivers menu" for details.
3 Insert floppy disk to floppy disk drive.
5. Follow succeeding screen information to complete process.
6. Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
. During the OS installation, the system prompts you to press the F6
key to install third-party SCSI or RAID driver.
2. Press <F6> then insert the floppy disk with RAID driver into the floppy
disk drive.
3. Follow the succeeding screen instructions to complete the installation.
3-20 Chapter 3: Software support
®