Resetting disks to non-RAID
An HDD that has been previously configured as part of another RAID
set in another platform is called a broken RAID HDD. When you install a
broken RAID HDD, you cannot select this HDD when configuring a RAID
set through the JMB363 utility.
To reset disks to non-RAID:
1.
In the main JMB363 RAID BIOS menu, highlight Revert HDD to
non-RAID using the up/down arrow key then press <Enter>.
2.
Use the space bar to select the HDD that you want to reset to
non-RAID.
A selected HDD shows a
3.
A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Pressing <Y> deletes all the data in the HDD.
ASUS P5VD2-MX/P5V-VM DH
[Main Menu]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Repair Mirror Conflict
Save and Exit Setup
Exit Without Saving
sign before it.
3-7