Asus Motherboard P5V-VM DH User Manual page 102

2. When the Level item is highlighted, use the up/down arrow key to
select the RAID set that you want to create.
[Create New RAID]
Name : JRAID
Level:
Disks: Select Disk
Block: 128 KB
Size : 319 GB
Confirm Creation
3. When the Disks item is highlighted, use the up/down arrow key to
highlight an HDD that you want to belong to the RAID set, then press
the space bar to confirm selection. Repeat the process until the HDDs
are selected.
A selected HDD shows a
[Hard Disk Drive List]
HDD0:
HDD1:
4. Key in the RAID volume capacity. Use the up/down arrow to choose
the block size. The default value indicates the maximum allowed
3-4
0-Stripe
sign before it.
Model Name
HDS722516VLSA80
HDS722516DLA380
[Create New RAID]
Name : JRAID
Level: 0-Stripe
Disks: Select Disk
Block: 128 KB
Size : 319 GB
Confirm Creation
[Create New RAID]
Name : JRAID
Level: 1-Mirror
Disks: Select Disk
Block: N/A
Size : 159 GB
Confirm Creation
Capacity Type/Status
XXX GB Non-RAID
XXX GB Non-RAID
Chapter 3: Software support