Mercedes-Benz Comand Operating Instructions Manual page 80

Destination entry
78
Requirements for "Viewing the vicinity of the
destination" and "Loading data from the Inter-
net" (Canada): a mobile phone must be con-
nected via Bluetooth
( page 196) with COMAND.
Y
The complete address of the POI is shown.
Viewing the vicinity of the destination
To select :: turn and press the controller.
X
If street images are available, the street in
the vicinity of the destination address is
shown.
Calling up the map
Select Map.
X
Move the map, change the map scale
X
( page 78) and select the POI.
Y
Calling up a POI
Select Call.
X
If a phone number is available, COMAND
switches to the telephone function.
Loading data from the Internet
Select www.
X
If an Internet address is available, data is
loaded from the Internet.
Saving a POI
To select Save: turn and press the control-
X
ler.
The POI can be saved as:
home address
R
a navigable address book contact
R
( page 128)
Y
a personal destination on the SD memory
R
card ( page 99)
Y
®
( page 114) or USB
Y
Starting route calculation
To select Start or Continue: turn and
X
press the controller.
If Calculate Alternative Routes
enabled in the basic settings, the menu
item Continue is displayed instead of
Start( page 66).
Y
Using the Map
Crosshair
:
Distance of crosshair position from cur-
;
rent vehicle position
To switch to navigation mode: press the
X
ß button.
To show the menu: slide 6 the control-
X
ler.
To select Destination: turn and press the
X
controller.
Select Using Map.
X
The map with crosshair is shown.
To move the map: slide 1, 4 or
X
2 the controller.
To change the map scale: turn the con-
X
troller until the desired map scale is selec-
ted.
The scale is displayed at the bottom.
To enlarge the map: turn the controller
counter-clockwise.
To zoom the map out: turn the controller
clockwise.
is