Mercedes-Benz Comand Operating Instructions Manual page 194

®
Bluetooth audio mode
192
Option 1: entering the passkey
You can find information on this in the
X
"Authorizing (connecting) a mobile phone"
section ( page 116).
Y
After successful authorization, the Blue-
®
tooth audio device is connected and
starts playing.
Option 2: Secure Simple Pairing
i ®
The Bluetooth
®
port Bluetooth
via Secure Simple Pairing. COMAND cre-
ates a six-digit code, which is displayed on
both devices that are to be connected
For some Bluetooth
pairing must be confirmed within 10 sec-
onds.
If the number code displayed on COMAND
X
and on the Bluetooth
same, select Yes: press the controller.
If you select Yes, authorization continues
and the Bluetooth
ted. Playback starts.
If you select No, authorization is canceled.
External authorization
If COMAND does not find your Bluetooth
audio device, this may be due to particular
security settings on your Bluetooth
device. In this case, check whether your Blue-
®
tooth audio device can locate COMAND.
®
The Bluetooth device name for COMAND is
MB Bluetooth.
Switch on Bluetooth
X
( page 194).
Y
To select Options: slide 6 and press the
X
controller.
To select Bluetooth Audio
X
press the controller.
To select Connect via Audio
X
turn and press the controller.
A message appears.
audio device must sup-
version 2.1 for connection
®
audio devices, the
®
audio device is the
®
audio device is connec-
®
®
audio
®
audio mode
Devices:
Device:
Authorizing
Start the authorization on your Bluetooth
X
audio device (see the manufacturer's oper-
ating instructions).
After successful authorization, the Blue-
®
tooth audio device is connected and
starts playing.
®
With some Bluetooth audio devices, play-
back must first be started on the device itself
so that COMAND can play the audio files.
Reconnecting a Bluetooth
device
®
The Bluetooth audio profiles are connected
automatically under the following circum-
stances:
one of the last two mobile phones to have
R
been connected has also been used as a
®
Bluetooth audio player (if this function is
supported by the mobile phone).
the mobile phone is automatically connec-
R
®
ted. The Bluetooth audio player is then
connected.
i
For an automatic connection with
COMAND, the telephone must be within
range.
®
For most Bluetooth audio devices, the
"automatic connection" must be activated
by checking a box. Depending on the
device used, this prompt often takes place
when authorizing (see the manufacturer's
operating instructions).
If the No Bluetooth Audio Device Con‐
nected message appears, you have two
options to reconnect the Bluetooth
device.
Option 1:
To select Connect Last Used Player
X
the basic display: press the controller.
If COMAND can locate the Bluetooth
audio device, it will be connected and will
start playing.
®
®
audio
®
audio
in
®