Mercedes-Benz Comand Operating Instructions Manual page 49

To switch to the menu bar: slide 6 the
X
controller.
To select System Settings: press the
X
controller.
Select WiFi.
X
The WiFi menu appears.
Select Connect via WPS
X
Select the vehicle from the device to be
X
connected and Connect via WPS
The vehicle is displayed with the SSID
HOTSPOT XXXXX.
To confirm the entry: press the controller.
X
Connecting a device via WPS PBC (Can-
ada)
Prerequisite:
For this type of connection, the device to be
connected must support "Connect via push
button".
Press the Ø button on the COMAND
X
control panel.
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select System Settings: press the
X
controller.
Select WiFi.
X
The WiFi menu appears.
To select one of the hotspots that has been
X
found: turn and press the controller.
A menu for making the connection appears.
Select Connect via WPS
X
Press the pushbutton on your device.
X
To confirm the entry: press the controller.
X
Generating a new security key (USA)
PBC.
PBC.
MB
Press the Ø button on the COMAND
X
control panel.
or
Press
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select
X
controller.
To select WiFi: turn and press the control-
X
ler.
The WiFi menu appears.
To select
X
and press the controller.
To select Regenerate: press the controller.
X
A new security key is generated.
To save the security key: turn the controller
X
and select Save.
The WiFi menu appears. The new security
key will now be displayed and verified when
a connection is established via the security
key. The connection must be re-estab-
lished with the newly created security key.
PBC.
i
Device connections established using the
previous security key will no longer work
after the security key is changed. You have
to reconnect these devices (
Vehicle in the main function bar.
System Settings: press the
Generate Security
page 45).
Y
WiFi
47
Key: turn
Z