Mercedes-Benz Comand Operating Instructions Manual page 57

Setting the color
Call up Vehicle Settings
X
To select Ambient Light
X
press the controller.
The setting element is active.
To select a color: turn the controller.
X
You can find further information on the inte-
rior lighting in the vehicle Operator's Manual.
Setting the interior welcome light
Call up Vehicle Settings
X
To select Interior welcome
X
and press the controller.
Press the controller.
X
The function is switched on or off, depend-
ing on the previous status.
You can find further information on the inte-
rior lighting in the vehicle Operator's Manual.
Switching locator lighting on/off
If you switch on the Locator Lighting
tion, the exterior lighting is switched on for a
short time when it is dark. The light switch
must be set to Ã.
The exterior lighting remains on for
40 seconds after the vehicle is unlocked.
When you start the engine, the locator light-
ing is switched off and automatic headlamp
mode is activated.
You can find further information on the auto-
matic headlamp mode in the vehicle Opera-
tor's Manual.
Call up Vehicle Settings
X
To select Locator Lighting: turn and
X
press the controller.
Press the controller.
X
The function is switched on or off, depend-
ing on the previous status.
You can find further information on the lock-
ing feature in the vehicle Operator's Manual.
i
There may be fewer settings or none
depending on your vehicle's equipment.
Setting the delayed switch-off time
( page 54).
Interior lighting delayed switch-off
Y
Color: turn and
The interior lighting is activated for the dura-
tion of the delayed switch-off time when the
SmartKey is removed from the ignition lock.
Call up
X
To select
X
Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
( page 54).
the controller.
Y
light: turn
You can find further information on the inte-
rior lighting in the vehicle Operator's Manual.
Exterior lighting delayed switch-off
If you switch on the
Delayed Switch-off
lighting is switched on for a short time after
the engine is switched off. The light switch
must be set to Ã.
The exterior lighting remains on for
func-
60 seconds after the engine is switched off. If
you close all the doors and the tailgate, the
exterior lighting switches off after the set
time.
Call up
X
To select
X
Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
the controller.
( page 54).
Displaying energy consumption and
Y
generated electrical energy
A bar graph displays the energy consumption
and the generated electrical energy.
Call up
X
To select Consumption: turn and press the
X
controller.
The energy consumption and the generated
electrical energy for the last 15 minutes of
the journey is shown.
Vehicle settings
Vehicle Settings ( page 54).
Y
Interior Lighting Delayed
Exterior Lighting
function, the exterior
Vehicle Settings ( page 54).
Y
Exterior Lighting Delayed
Vehicle Settings ( page 54).
Y
55
Z