Adjusting The Brightness - Mercedes-Benz Comand Operating Instructions Manual

Basic functions
230
Selecting sound settings
You can select sound settings in the following
operating modes:
CD/MP3
R
Video DVD
R
Radio (active media source in COMAND)
R
AUX
R
Switch on an operating mode (e.g. audio
X
CD mode) ( page 232).
Y
Select Treble or
X
the :=; buttons on the remote
control and press the 9 button to confirm.
An adjustment scale appears.
Select a setting using the 9: but-
X
tons and press the 9 button to confirm.
Multiple users
Simultaneous use of the rear-compart-
ment disc drive
The two rear-compartment screens can be
operated almost entirely independently from
one another. However, a conflict may occur in
some menus if the two screens are used
simultaneously.
The following functions affect both screens:
changing playback options
R
selecting a track (from a track list or folder)
R
using the play, pause and stop functions
R
fast forward/rewind or scrolling
R
calling up the DVD menu and navigating
R
within it
setting the language, subtitles and camera
R
angle
calling up interactive DVD content
R
The following functions affect only one
screen:
changing audio and video functions as well
R
as picture settings
switching between full screen and the
R
menu
Bass using
Switching between operating modes
When you exit an operating mode (e.g. audio
CD mode), the current setting is saved. If you
call up this operating mode again later, there
are two possibilities:
the operating mode has been changed on
R
the other screen.
the operating mode has not been changed.
R
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
Picture settings
Overview
You can select the picture settings in video
DVD and AUX mode ( page 241).
Y
Adjusting the brightness, contrast and
color
Switch to video DVD mode (
X
To show the menu: press the 9 button on
X
the remote control.
Select DVD-Video using
X
the :=; buttons and press the
9 button to confirm.
Select Brightness, Contrast
X
using the 9: buttons and press the
9 button to confirm.
A scale appears.
Select a setting using the 9: but-
X
tons and press the 9 button to confirm.
page 235).
Y
or Color