Chipset Configuration - Supero SuperServer 5028R-WR User Manual

S S
UPER ERVER 5028R-WR User's Manual
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last power state before a power loss. The options are Power-On,
Stay-Off and Last State.

Chipset Configuration


Warning! Setting the wrong values in the following sections may cause the system
to malfunction.
CPU Configuration
The following CPU information will be displayed:
•
Processor Socket
•
Processor ID
•
Processor Frequency
•
Max (Maximum) CPU Speed
•
Min (Minimum) CPU Speed
•
Processor Max Ratio
•
Processor Min Ratio
•
Microcode Revision
•
L1 Cache RAM
•
L2 Cache RAM
•
L3 Cache RAM
•
CPU1 Version
Clock Spread Spectrum
Select Enable for Clock Spectrum support, which will allow the BIOS to monitor
and attempt to reduce the level of Electromagnetic Interference caused by the
components whenever needed. Select Disabled to enhance system stability. The
options are Disabled and Enabled.
7-6