HDD
On the SuperServer 5028R-WR, this LED indicates hard drive and/or DVD-ROM
drive activity when flashing.
Power
Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
3-4
Drive Carrier LEDs
Each drive carrier has two LEDs:
•
Green: When illuminated, the green LED on the drive carrier indicates drive
activity. A connection to the SATA backplane enables this LED to blink on and
off when that particular drive is being accessed. Please refer to Chapter 6 for
instructions on replacing failed hard drives.
•
Red: When this LED flashes it indicates the drive is rebuilding. When solid on
it indicates a drive failure. If a drive fails, you should be notified by your system
management software. Please refer to Chapter 6 for instructions on replacing
failed drives.
Chapter 3: System Interface
3-3