S
S
UPER
ERVER 5028R-WR User's Manual
5-5
Installing Memory
Caution! Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
Memory Support
The X10SRW-F supports up to 512 GB of ECC/non-ECC Load-Reduced (LRDIMM),
up to 256 GB of ECC Registered (RDIMM) or up to 64 GB of unbuffered (UDIMM)
DDR4-2133/1600/1333 memory in eight DIMM sockets.
DIMM Installation
Installing Memory Modules
1. Insert the desired number of DIMMs into the memory slots starting with
DIMMA1. See the Memory Installation Tables below.
2. Insert each DIMM module vertically into its slot. Pay attention to the notch
along the bottom of the module to avoid installing incorrectly (see Figure 5-4).
3. Use your thumbs to gently press down on both ends of the DIMM module
until it snaps into place in the slot. Repeat for all modules.
4. Press the release tabs to the locked positions to secure the DIMM module
into the slot.
Socket Key
Figure 5-4. DIMM Installation
5-8