Wf36/30Wp Weathered Pine Log Placement - Vermont Castings VWF18 Installation And Operating Instructions Manual

LOG PLACEMENT
MODEL VWF36/30WP WEATHERED PINE
LOG
1. Slide shield plate behind burner pan. Figure 99
Rear Log
Figure 100 -
Place Rear Log
LG901
3630WP back log
3. Place Bottom Right Log #2 along out-
side of grate. Rest end on Rear Log
#1. Control knob will stick through
bottom notch of log. Figure 101
4. Place Bottom Left Log #3 on grate.
The "V" of the log should straddle the
end grate bar. Figure 101
27D8520
Burner Pan
Figure 99 -
Slide Shield Plate Behind Burner Pan
LG830
VWF24 shield
2. Place Rear Log #1 on back of grate.
Left side should fit on grate in front
of rear stand. Right side goes on the
rear stand of grate. Figure 100
LG901
Bottom Left
Log #3
'V' Straddling
Grate Bar
Figure 101 -
Place Bottom Logs
LG902
3630WP bottom logs
VWF Series Vented Gas Log Set
Shield Plate
LG830
Bottom Right
Log #2
LG902
Control Knob
will go Here
41