Drying Heat; Activation/Deactivation Of Drying Heat - Miele dishwashers Operating Instructions Manual

In all programmes the drying process is
assisted by the heating element. Drying
heat is set as activated at the factory.
Switching the heating elements off dur-
ing drying will save approx. 0.1 kWh in
electricity. The dishes are then dried
with residual heat. Open the dish-
washer door at the end of a programme
to allow the dishes to dry better.
^ Open the door.
^ Switch the dishwasher off using the
"Off" button (16).
^ Press the a and c buttons in and
whilst doing so switch the dishwasher
on using the "On" button.
^ Then release these buttons.
The "Salt" and b indicator lights will
flash.
If this is not the case the process must
be repeated.
34
Drying heat is switched on if:
– the a indicator light is not lit up
Drying heat is switched off if:
– the a indicator light is lit up
^ Press the a button to change the
setting.
Depending on the previous setting the
a indicator light will either come on or
go out.
^ Press button f twice.
^ Switch the dishwasher off using the
"Off" button.
The change is now stored in memory.