Setting The Machine For Water Hardness Level 2.7-12.6 Mmol/L; Checking The Programmed Water Hardness Level - Miele dishwashers Operating Instructions Manual

^ Press the f button.
The f indicator light will light up.
An indicator light will come on next to
one of the a - e buttons. This repre-
sents the water hardness level set in
the machine. See Table 2.
15 - 16 2.7 - 2.8
17 - 21 3.0 - 3.7
22 - 24 3.9 - 4.3
25 - 31 4.5 - 5.6
32 - 70 5.7 - 12.6
If this value corresponds to your water
hardness level:
^ Switch the dishwasher off using the
"Off" button.
If you would like to change the setting
for a different water hardness level:
^ Press the button which corresponds
to the water hardness level in your
area (see Table 2).
The "Salt" and b indicator lights will flash.
^ Press button f twice.
The "Salt" and f indicator lights will
flash.
^ Switch the dishwasher off using the
"Off" button.
The programmed water hardness level
is now stored in memory.
16
To check which hardness level the ma-
chine has been set for:
^ Repeat steps 1 to 5.
An indicator light will come on next to
one of the a - e buttons. This repre-
sents a water hardness level of be-
tween 0.2 mmol/l and 2.5 mmol/l (1 °d
and 14 °d German scale) set in the ma-
chine. See Table 1.
^ If there are no indicator lights on
press the f button.
The f indicator light will light up.
a
b
An indicator light will come on next to
one of the a - e buttons. This repre-
c
sents a water hardness level of be-
d
tween 2.7 mmol/l and 12.6 mmol/l
e
(15 °d and 70 °d German scale) set in
the machine. See Table 2.
^ Switch the dishwasher off using the
"Off" button.