Carriage Unit; Functions Of Carriage Unit - Canon iPF700 Series Service Manual

Large format
Hide thumbs Also See for iPF700 Series:
Table of Contents

Advertisement

Chapter 2

2.3.2.3 Carriage Unit

2.3.2.3.1 Functions of Carriage Unit

a) Printhead mounting function
The carriage, which fixes the printhead in position mechanically, is connected to the contact of the head relay PCB.
b) Control function
The carriage carries a carriage relay PCB, which relays printhead drive signals, and an encoder, which generates print timing signals. The carriage relay PCB is
connected to the main controller by a flexible cable.
c) Carriage drive function
The carriage is caused to reciprocate level on t he plat en by means of the carriage belt that is driven by the power imparted from the carriage motor.
d) Printhead maintenance function
This printer performs cleaning operations, such as wiping the printhead and sucking inks, with the carriage halted at its home position.
e) Nozzle check function
This printer carries out an ink discharge operation with the carriage halted at the maintenance jet tray, locating the nozzles in the printhead failing to discharge with
a head management sensor attached to the head management sensor.
f) Carriage height adjustment function
The separation between the face of the printhead and the paper varies with each paper thickness. A narrow gap makes quality better but could smear the print surface
as a result of paper rubbing against the face or cause damage to the nozzle assembly.
Head height (mm)
1.45
1.75
2.05
2.35
2.65
g) Paper width detection function/skew detection function
The multisensor attached to the lower left part of the carriage detects the width of paper fed on the platen and skews in it.
h) Automatic printhead position adjustment function
The multisensor attached to the lower left part of the carriage reads the result of an adjustment pattern printed, allowing for automatic adjustment of the printhead
position accordingly.
i) Remaining roll media detection function
The printer prints a bar code on roll media when they are unloaded. The multisensor attached to the lower left part of the carriage indicates the remaining volume
of roll media.
j) Internal unit temperature sensor
A thermistor installed on the head relay PCB detects the internal unit temperature near the printhead.
2-10
T-2-2
Media type Environmental condition
(Temperature:15-25,Humidity:40%-60%)
Glossy Paper,Plain Paper(Line drawing)
Plain Paper,Heavyweight Coated Paper(Line drawing)
Heavyweight Coated Paper
Premium Matte Paper
Premium Matte Paper(Temperature:15-30,Humidity:10%-40%)
0013-5642

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents