Miele CVA 4062 Operating And Installation Instructions page 60

Frequently asked questions
Water is in the waste unit.
Possible fault
This is not a fault.
"Coffee water" is in the waste unit.
Possible fault
– If the grind setting is too coarse, this
can result in too much coffee water
in the waste unit.
– The main dispenser cap is not
positioned correctly.
The descaling process was started accidently.
The descaling process cannot be canceled once it is started. The process
needs now to be completed. This is a safety feature to ensure the process will be
completed. It is important for best results and the longevity of the machine.
See "Descaling".
The machine makes loud noises during descaling
During a descaling cycle, the machine is relatively loud because water is being
forced through the lines at high pressure. This is not a fault.
The preheating time is increased, the water flow amount is not correct and
the unit performs less?
Possible fault
The machine needs to be descaled.
No water flows from the main dispenser.
Possible fault
The filters in the brew unit are clogged. Rub any residue off the filters with a
60
Solution
This is residual water from the cleaning
process.
Solution
– Adjust the grind setting and/or
amount of coffee.
– Lubricate the cap with the supplied
silicone grease.
– If the cap is faulty, replace it with the
spare part supplied.
Solution
See "Descaling the appliance".
Solution
sponge. See "Cleaning and Care".