Miele CVA 4062 Operating And Installation Instructions page 59

Instead of coffee only water is dispensed.
Possible fault
– The beans may have gotten stuck.
– The ground coffee funnel cover was
opened and closed and a
preparation with ground coffee was
selected but no ground coffee was
inserted.
The coffee system switches
automatically back to bean use after
preparation.
The drip tray is empty but a message to empty it is displayed.
Possible fault
– The metal contacts are soiled or wet.
– Check if the drip tray is inserted
correctly.
The machine does not rinse when turned on although the automatic rinse
feature is set to "On".
When the machine is still at a temperature of about 140°F (60°C). The machine
will not rinse when it is too hot.
The water (or milk) dispensing stops when programming the serving size.
Possible fault
– There was not enough water in the
tank or milk in the milk container. The
dispensed amount will not be saved.
– If the maximum amount is
dispensed, the flow stops
automatically. The maximum amount
is saved.
Frequently asked questions
Solution
– Pull the bean container out and push
it back in.
Solution
– Clean and dry the contacts.
– Insert the drip tray as described in
"Cleaning and Care - Drip tray".
– Turn the machine off and on again
with the main switch.
– If the message still appears contact
Technical Service.
Solution
– Fill the water tank or milk container
before programming the serving
size.
59