BBV Tx40X Installation Manual page 15

BBV design and manufacture a wide range of CCTV
products, specialising in protocol conversions.
If you can't see what you require, please call for
Rx10X
Rx200/WBX
Rx300/WBX
Rx400/WBX
Rx25X
Rx35X/WBX
Rx45X/WBX
Rx55X/WBX
Tx40X manual V1.06 July 2015
assistance.
01323 444600
The Rx10X is designed to offer a simple solution for applications where there is a need to
control one of a variety of 3rd Party Dome Cameras. The receiver offers considerable
opportunities for upgrading existing BBV telemetry systems as it is now possible to add a
wide range of integrated domes into the system.
The Rx200 offers control of AC driven pan only or wash / wipe / lights for static cameras.
The compact dimension of this PCB allows it to be fitted within a camera housing or dome
as an alternative to the more usual weather-proof enclosure.
The Rx300 offers control of AC driven pan, tilt and zoom cameras, whether mounted
externally or internally. This gives you entry level control of AC Pan/Tilt/Focus with 1
auxiliary output. Controlled by BBV up-the-coax and 20mA twisted pair. The compact
dimensions of the PCB allow it to be fitted within camera housing as an alternative to the
more usual weather-proof enclosure.
The Rx400P Telemetry Receiver is ideal for controlling full function ac pan/tilt/zoom
Cameras in an external environment where accessories such as wiper, washer etc. are
the norm. The Rx400P offers up to 16 full scene presets. These may be used as a method
of visually patrolling large areas of a site. They may be interlinked with detection devices
in automated system designs. Presets effectively reduce reliance on the operator.
The Rx25X Multiple Protocol Auxiliary Relay Receiver is designed to offer a simple, cost
effective solution to activate an auxiliary output, for example to activate a Washer, Wiper
or Lights in a static Camera application via a twisted pair cable.
The compact dimensions of the PCB allows fitting within the camera housing.
The Rx35X is a telemetry receiver with ac pan and tilt outputs. It supports BBV RS422,
Pelco P, Pelco D, Molynx D type, Sensormatic RS422, Vista RS485 & VCL RS485 telemetry
and it allows entry level control of ac pan/tilt and zoom/focus with a wiper auxiliary
output. The compact dimensions of the PCB allow it to be fitted within a camera housing
as an alternative to the more usual weather proof enclosure.
The unit is suitable for 230V mains operation. As a factory fitted option, the receiver can
be supplied to operate from 24Vac or 110Vac. This option must be specified at the time
of order.
The Rx45X MK5 is designed to control fixed speed AC pan & tilts heads from BBV and
Baxall up-the-coax telemetry and a range of BBV485/422 telemetry protocols.
The receiver offers system designers the option of using traditional P/T/Z heads for
applications where it is necessary to specify a range of camera / lens combinations.
The Rx55X MK5 is designed to control variable speed DC pan & tilts heads from BBV and
Baxall up-the-coax, and a range of RS485/422 telemetry protocols.
The receiver offers system designers the option of using traditional P/T/Z heads for
applications where it is necessary to specify a range of camera / lens combinations.
15